900 Series In Ceiling Speakers
High Performance Inset Grille Speakers
Theater Systems
Vocal Integrity® system design allows
use of these speakers as front L/C/R’s in theater
systems. Smooth octave-to-octave transition means vocals are
clear and distinct, on-screen effects are easy to pin-point.
Constrained High Mass Frame
Modeled after our acclaimed JAM in-wall
speakers, we combine an aluminum frame, a closed-cell foam
damping layer, and a 1" sheet of medium density fiberboard
for true sonic fidelity. By using this frame, instead of a
typical plastic unit, we dramatically increase the sonic impact
of the system. You’ll hear deeper bass, and improved
midrange clarity.
Drive Units
Our audiophile silk dome tweeter is the
key to our system’s performance. This high power
handling, broad dispersion drive unit spreads sound evenly
throughout the room. The anodized aluminum bass unit stays
pistonic throughout its operating range — for
reduced distortion and truer reproduction.
Our exclusive Pi Space Tuning overcomes
“bloated” midbass gain when the
speaker is placed near walls — a
situation likely to occur when used as L/C/R’s.
Vocal Integrity® System Design
We’ve designed and tested our
systems to exhibit the lowest level of distortion in the
critical midrange — especially off axis. This
requires attention to all elements of the design, from driver
parameters to crossover tolerances. The end result is a series
of speakers that outperform the field when used in theater
applications.
Flush To The Ceiling
Our frame sits just 2mm off the ceiling,
twice as shallow as the typical in-ceiling speaker. Combined
with our flat micro-perf grilles, the speakers cast a minimal
shadow, looking almost flush to the ceiling.
Weather Resistant Construction
You can place 900 Series speakers in high
humidity areas, like kitchens, bath, and protected outdoor
settings. All exposed components are weather resistant.
Model 985 Speaker with Constrained High
Mass Frame
Distributed Audio Systems
900 Series speakers have high sensitivity,
making them perfect for multi-room systems. With broad off-axis
dispersion (-6 dB at 45°), these speakers will easily fill a
room without hot spots or drop-outs.
room without hot spots or drop-outs.
|
Model
|
965
|
985
|
|
Description
|
6.5” 2-way
|
8” 2-way
|
|
Max. Output
|
106 dB (100w)
|
108 dB (100w)
|
|
Room Size (ft3)
|
Up to 4,500
|
Up to 4,500
|
|
Response (-3 dB)
|
50-20,000 Hz
|
45-20,000 Hz
|
|
6 dB Downpoint
|
40 Hz
|
38 Hz
|
|
Sensitivity
|
86 dB
|
88 dB
|
|
Coverage (-6 dB)
|
70º
|
70º
|
|
Nom. Impedance
|
8 ohms
|
8 ohms
|
|
Bass Unit
|
6.5” aluminum
|
8” aluminum
|
|
Tweeter
|
1” silk dome
|
1” silk dome
|
|
Construction
|
Constrained high-mass frame
with 1” MDF baffle, Slot/Lock clamping
|
Constrained high-mass frame
with 1” MDF baffle, Slot/Lock clamping
|
|
Cutout
|
7-5/8”
|
9-5/8”
|
|
Frame
|
9”
|
10-3/4”
|
|
Depth In Wall
|
4-1/4”
|
4-1/4”
|
|
Weight (ea.)
|
5 lbs.
|
5.5 lbs.
|
