JM Series In-Wall Speakers
Floating Grille Audiophile Speakers
2-Channel Systems
Use the JMi or JTi in full-range 2-channel
systems. Choose these speakers where you want excellent
performance
Theater Systems
The JMi and JTi are excellent in theater
systems — for front or rear application. Use the JAM
In-Wall Sub for bass. Click here for more information.
Crossover Networks
We build our crossovers with the finest
electrical components. We use a glass PCB board and hand-wound
chokes. For increased transient response and clarity, we use
our own TransientEdge® capacitors and 14ga. cable for
internal wiring.
Reverberance and Pi Space
tuning overcome placement and room acoustic problems.
tuning overcome placement and room acoustic problems.
Grilles
Our custom–perforated grilles float
in
front of the speaker,
covering all hardware. They can be painted to match your walls.
covering all hardware. They can be painted to match your walls.
L5 Speaker Baffle
We fabricate a 5-ply constrained layer
baffle with a hard anodized aluminum frame, a damping layer,
and two sheets of MDF sandwiching a visco-elastic polymer core.
This type of construction converts vibrations into heat,
reducing distortion. You’ll hear more bass, and cleaner
midrange.
Drivers
Our in-walls use custom-built drivers,
including a 1" soft-dome tweeter and long-throw bass
units. We designed the bass units with a shorting cylinder
— a special device which reduces distortion, especially
at high volumes.
Frame
Our anodized aluminum frame holds the
speaker system rigidly in the wall, reducing vibrations which
cause distortion.
Models JTi (front) and JMi.
Product Description
These are the finest in-wall speakers
available. Behind the elegant floating grille is a speaker
system built using the same components used in all Bay Audio
cabinet speakers. They perform like audiophile speakers should
— with pinpoint imaging, midrange clarity, and deep,
tight bass.
|
|
JMi
|
JTi
| |
|
Description
|
6.5” 2-way
|
Dual 6.5”
2-way
|
Dual 8” in-wall
subwoofer
|
|
Max. Output
|
Full range:
100 dB (25w)
Bandwidth limited: 109 dB
(200w)
|
Full Range: 105 dB (100w)
Bandwidth limited: 109 dB
(200w)
|
107 dB
|
|
Room Size (ft3)
|
Up to 3,000
|
Up to 5,000
|
Single Subwoofer: 5,000 ft3, corner loaded
2,500 ft3, not corner loaded
Stereo Pair: 10,000 ft3, corner loaded
5,500 ft3, not corner loaded
Approximately 1 JM Sub for
every 2,500 ft3
|
|
Response (-3 dB)
|
49-20,000 Hz
|
49-20,000 Hz
|
32-200 Hz
|
|
6 dB Downpoint
|
32 Hz
|
32 Hz
|
29 Hz
|
|
Sensitivity
|
86 dB
|
88 dB
|
|
|
Coverage (-6 dB)
|
60º H, 50º V
|
60º H, 30º V
|
|
|
Nom. Impedance
|
8 ohms
|
8 ohms
|
|
|
Bass Unit
|
6.5” poly
|
Dual 6.5” poly
|
Dual 8” poly
|
|
Tweeter
|
1” dome
|
1” dome
|
|
|
Construction
|
L5 Frame with anodized
aluminum, 4-layer baffle
|
L5 Frame with anodized
aluminum, 4-layer baffle
|
Anodized aluminum frame with
1-1/4” medite baffle
|
|
Cutout
|
7-5/8 x 11-3/4”
|
7-5/8 x 18-5/8”
|
8-3/8 x 18-5/8”
|
|
Frame
|
9-3/8 x 13-1/2”
|
9-3/8 x 20-3/8”
|
9-3/8 x 20-3/8”
|
|
Depth In Wall
|
3-1/4”
|
3-1/4”
|
3-1/4”
|
|
Weight (ea.)
|
8 lbs.
|
14 lbs.
|
14 lbs.
|
